GE PHP900 Manuel D'utilisation page 19

ge.com
Possible Causes What To Do
Pan detection/sizing
not working properly
Improper cookware
being used.
• Use a flat induction capable pan that meets the
minimum size for the element being used, See the
Using the correct size cookwore section.
Pan is improperlg placed. * Make sure the pan is centered on the corresponding
surface element.
Cooktop control * Check to see that the control is set properlu,
improperlg set.
Display flashing "E" A hardware error has * Call for service.
alone (no other letter} occurred.
Display flashing "E" Kegpad Error, indicating * Clean the keypad area. Wipe up spills or remove
alternating to "c" kegpad cleaning is needed, utensils from the keypad area.
Display flashing "E"
alternating to "o"
Over Temperature, indicating
over temperature of a
surface element or electronics.
• Remove an empty pan from the surface element.
• Allow the cooktop to cool down approximatelu
30 minutes.
Check to be sure ventilation to the cooling sustem
below the cooktop is not blocked.
19