Publicité
cont. program functions
7.9 Reminder function
Touch "
" button under standby state to enter to
reminder function setting, at this time the clock
position hour value will flash, minute value will
long lit. The reminder time setting icon "
the reminder time icon "
(1) Rotate programming switch KB2 to set the hour,
at this time the hour value is always bright, the value
setting range is 0-23;
(2) Touch "
" button again, minute value
flashes, and hour value keeps bright;
(3) Rotate programming switch KB2 to set the minute,
at this time the value of the minute is always bright,
the setting range is 0-59.
7.10 Start/pause/cancel function
After setting up the cooking function, touch "
button to start working; if touching "
the cooking is suspended, you can restart the work.
During oven cooking, touch "
pause the cooking, temperature and time will flash
display, oven working icon"
icon is always on; Touch "
cancel current cooking.
www.linarie.com.au
" flashes,
" is always on.
"
" button when
" button once can
" flashes, function
" button again will
(4) When the alarm time is set, you can touch
"
" for confirmation. At this time, the display
shows the system time, the reminder time setting
icon "
" goes out ,the second icon " : " flashes,
the "
"is always on, and the reminder time starts
to count down in seconds. When the time countdown
is 00:00, buzzer will sound for 1 minute (1s/time),
and the reminder time icon "
(1s/time), then press any button to stop flashing.
Note:
(1) During setup, second icon " : " and alarm clock icon
"
" will always bright.
(2) During setup, touch "
reminder time setting and return to standby state.
(3) If a reminder function has been set, then reminder icon
"
"should always be displayed when the menu is working,
and the reminder time can be queried.
When setting system time, press "
the clock setting state directly and return to standby state.
When oven function, cooking time and temperature
are set, press "
and return to standby state.
After setting the reservation function or entering the
reservation funcation, pressing the "
to standby mode directly.
14
" is always flashing
" button will cancel the current
" button to exit
" button to exit function setting state
" button can return
Publicité
