Publicité
Les langues disponibles
Les langues disponibles
cont. program functions
7.7 Error code & Solutions
7.a Display will show E-1 if sensor is short circuit or
open circuit under cooking mode, buzzer will
continuously prompt for 10 times (1s/time), refer to
display effect 10. Oven will be locked at this time,
touch "
" button can return to standby mode.
Pic 10: Sensor abnormal
alarm display effect
7.b When the temperature is below 35°C after
5 minutes of heating(except for defrost mode
and Eco mode), it means the heating element
have a problem, display will show E-2, buzzer
will continuously prompt for 10 times(1s/time),
refer to display effect shown as pic 11.
Touch "
" button can return to standby status
at this time.
Pic 11: Heat element
abnormal alarm
display effect
7.c During self-cleaning process, if display
screen shows fault code "E-3" when door is
locked into place, it means door lock or
detection circuit is faulty. When the fault
code appears, the buzzer will continuously
prompt for 10 times (1s/time), display effect
as below pic 12).Touch "
return to standby status.
Pic 12: Door lock abnormal
alarm display effect
7.8 Enquiry function
(1) When the oven is working, touch "
once can query system time, the clock position
shows the current time of the system, second icon
will flash. Re-touch "
matically return to the barbecue time display.
(2) After the reminder time setting is completed,
and the oven in the reservation or working state,
touch "
" can query the alarm remaining countdown.
Re-touch "
" button or 10s later automatically
return to its original state. You can query the remaining
alarm time and reset the alarm time under standby
state. When the alarm countdown time is less than
1 minute, the clock position show 0 : 00.
www.linarie.com.au
" button can
" button
" button or 10s later auto-
7.d In any state, when the power board cannot
receive valid communication data
from the display board for 20 seconds, the
power board automatically turns off all
loads, and the display board displays "E-5".
When the display board cannot receive valid
communication data from the power board
for 20 seconds, the display board sends data
to close all loads, and the display board
displays "E-6".
Error
Description
code
E-1
Open or shorted sensor
E-2
Sensor failure
E-3
Door lock failure
E-4
MCU Register failure
The power board cannot
receive the effective
communication data from the
E-5
display board for 20 seconds,
and the power board automa-
tically turns off all loads.
The display board cannot
receive valid communication
data from the power board
E-6
for 20 seconds, and the
display board sends data to
turn off the load.
E-7
High temperature protection
occurs, and the load is turned
off within 10 seconds.
(3) In the reservation status, first touch of
the"
" can query the cooking start time,
the clock position shows the cooking start
time, clock value flashes. Re-touch "
button or 10s later automatically return to
the system time display.
13
Reason
Sensor or detection
circuit failure
Sensor or heating
element failure
circuit failure
MCU failure
Communication line
failure
Communication line
failure
Defective sensor or
heating element drive
circuit
"
Publicité
