Publicité
English
Safety information
Hazard levels
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NO TICE
TICE
NO
NO
TICE
Indicates a situation which, if not avoided, could result
in damage to property.
Other message levels
Important
Indicates significant information which is essential for
the product to function correctly.
Note
Indicates useful information which helps in getting
the most out of the product.
Safety instructions
CAUTION
IR is emitted from this product. It can be harmful
to the eyes. Avoid eye exposure. Use shielding or eye
protection.
CAUTION
Possibly hazardous radiation exposure from this
product. To avoid exposure, use the specified controls
or adjustments or performance of procedures.
NO TICE
TICE
NO
NO
TICE
•
This is a Class 1 laser product
•
The Axis product shall be used in compliance with
local laws and regulations.
•
This product is for professional use.
•
Install this product at a safe distance from children.
•
Store the Axis product in a dry and ventilated
environment.
•
Avoid exposing the Axis product to shocks or heavy
pressure.
•
Do not install the product on unstable poles,
brackets, surfaces or walls.
•
Use only applicable tools when installing the Axis
product. Using excessive force with power tools
could cause damage to the product.
•
Do not use chemicals, caustic agents, or aerosol
cleaners.
•
Use a soft cloth dampened with pure lukewarm
water to clean the device.
•
Don't use chemicals such as window cleaner or
acetone to clean your device.
•
Use only accessories that comply with the technical
specification of your product. These can be provided
by Axis or a third party. Axis recommends using
Axis power source equipment compatible with your
product.
•
Use only spare parts provided by or recommended
by Axis.
•
Do not attempt to repair the product yourself.
Contact Axis support or your Axis reseller for
service matters.
•
Do not point the camera lens toward the sun or
other high-intensity radiation sources because this
could cause damage to the camera.
•
Use a yellow/green colored grounding cable of at
2
least 0.5 mm
or 20 AWG.
Transportation
NO TICE
NO
NO
TICE
TICE
•
When transporting the Axis product, use the
original packaging or equivalent to prevent damage
to the product.
Battery
The Axis product uses a 3.0 V BR2032 lithium battery
as the power supply for its internal real-time clock
(RTC). Under normal conditions this battery will last
for a minimum of five years.
Lithium coin cell 3.0 V batteries contain
1,2-dimethoxyethane; ethylene glycol dimethyl ether
(EGDME), CAS no. 110-71-4.
Dome or front glass
NO TICE
NO
NO
TICE
TICE
•
Be careful not to scratch, damage or leave
fingerprints on the dome or front glass since this
can decrease image quality. Keep the protective
plastic on until the installation is complete.
•
Don't clean a dome or front glass that looks clean
to the eye, and never polish the surface. Excessive
cleaning can damage the surface.
•
Avoid cleaning the dome or front glass in direct
sunlight or at elevated temperatures, since this can
cause stains.
Français
Informations sur la sécurité
Niveaux de risques
DANGER
Indique une situation dangereuse qui, si elle n'est pas
évitée, entraînera le décès ou des blessures graves.
AVERTISSEMENT
Indique une situation dangereuse qui, si elle n'est pas
évitée, pourrait entraîner le décès ou des blessures
graves.
5
Publicité
