Publicité
THE APPLIANCE
ACCESSORIES
• The turntable ensures even cooking of
food throughout, with no need to
intervene.
It rotates in either directions. If it does not
turn, verify that all components are
properly positioned.
It may be used as a cooking dish. For
easy removal, wells are provided on
either side (fig.A). Do not try to turn it
manually, as you could damage the drive
system.
• Rotation is controlled by the drive
hub (fig.B).
If you take out the support with the drive
hub, make sure you do not let water get
into the motor shaft orifice.
Remember to put back the drive hub,
support wheels and the turntable.
Do not try to turn it manually, as you could
damage the drive system.
• The roller support: If it does not turn
properly, check that there is nothing
A
B
C
D
E
underneath the turntable stopping it from
turning.
• When the turntable is in the stopped
position, large dishes can be used which
cover the entire surface of the oven. In
this case, it is necessary to turn the
container or mix its content half-way
through the programme.
• The PIZZA plate (fig.C): The Pizza
plate, with its special coating, absorbs
microwaves from underneath. It spreads
the heat under the food to cook or re-heat
it and so give the desired colour and
crispness, while the grill browns the top.
• Folding rack (fig.D): The rack should
never be used with other metal containers
in
microwave, grill + microwave or PIZZA
modes.
8
Identification label
Drive hub
Wheel support
Turntable
Control panel
Publicité
