Publicité
5. After setting the presetting time, press the PROG button once, the letter TIMER on the LCD will
disappear. The LCD will display the current clock. After 15s, the blue indicator in PROG button will
be extinguished.
6. Press the on/auto/off button twice, the indicator in it will illuminate blue and flash. The LCD will
display the current clock. You may see the automatic start time by pressing PROG twice.
Note: You may cancel the automatic start function by pressing on/auto/off button once to stop
machine, if you want to brew coffee again immediately, yuo shall press on/auto/off button once again
to start brewing immediately. If you want to change the automatic start time, only following the above
1-4 steps again.
When the time is due the blue indicator in on/auto/off will stop flashing and illuminate red, then the
unit starts brewing. The appliance will be cut off power automatically after
40 minute
if it has not
been manually disconnected at the completion of brewing.
MEMORY
If the power supply has been broken off or unplug the power cord unintentionally during operation,
the appliance will be continued previous operation automatically from the point when the
disconnection occurred provided that the pause does not exceed 10s, even without pressing any
button. In the event the pause time exceeds 10s, the display shows the default setting, the appliance
must be re-started.
CLEANING AND MAINTENANCE
CAUTION: Be sure to unplug this appliance before cleaning.
To protect against electrical shock, do not immerse cord,
plug or unit in water or liquid. After each use, always make
sure plug is first removed from wall outlet.
1) Clean all detachable parts after each use in hot, sudsy
water.
2) Wipe the product's exterior surface with a soft, damp cloth
to remove stains.
3) Water droplets may buildup in the area above the funnel
and drip onto the product base during brewing. To control
the dripping, wipe off the area with a clean, dry cloth after
each use of the product.
Publicité
