Publicité
The first time you put your appliance into operation, set the thermostat between "4 to 6" and
let it run empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position "1" the warmest to "7" the coldest. Adjust
the temperature control to the setting that best suits your needs. The setting of "4/6" should
be appropriate for home or office refrigerator use.
To turn the refrigerator off, turn the temperature control to "0".
Appliance thermostat has 7 settings. The appliance assures that temperature is maintained
as long as it is in operation and that it is used in normal conditions of use. The temperature
inside the appliance can be influenced by many factors: ambient temperature, sun exposure,
number of door's opening and amount of food stored... The slight changes in temperature are
perfectly normal.
• Setting MAX (6 to 7): Refrigerator compartment average temperature 4 to 2°C
• Setting MED (4 to 6): Refrigerator compartment average temperature 6 to 4 °C
• Setting MIN (1to 4): Refrigerator compartment average temperature 8 to 6 °C
NOTE :
• Turning the temperature control to "0" position stops the cooling cycle but does not shut
off the power to the refrigerator.
• If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before
• Restarting the unit. If you attempt to restart before this time delay, the refrigerator will
not start.
• If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize between
adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise
too much.
➢ "COLD ZONE" SYMBOLS (Depending on models)
You will find the symbol opposite in your refrigerator. It clearly shows the location
of your appliance's coldest zone: the temperature here is + 4°C or less. A
temperature indicator here enables you to check that your refrigerator is working
correctly.
TEMPERATURE INDICATOR (Depending on models)
Temperature to set
Correct temperature
Attention: Prolonged opening of the door will cause the internal temperature to
rise. You must therefore read the indicator within 30 seconds of the door being
opened for the reading to be correct.
25
Publicité
