Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
DE
DEUTSCH
EG-KONFORMITÄTSERKLÄRUNG
Wir, ikra GmbH, Schlesierstrasse 36, D-64839 Münster,
GERMANY, erklären in alleiniger Verantwortung, dass
das Produkt Akku Laubsauger/Laubbläser ALS 40,
auf das sich diese Erklärung bezieht, den einschlägigen
Sicherheits- und Gesundheitsanforderungen der EG-
Richtlinien
2006/42/EG (EG-Maschinenrichtlinie)
2014/30/EU (EMV-Richtlinie)
2000/14/EG+ 2005/88/EG (Geräuschrichtilinie)
2011/65/EU (RoHS-Richtlinie)
einschließlich Änderungen entspricht. Zur sachgerech-
ten Umsetzung der in den EG- Richtlinien genannten
Sicherheits- und Gesundheitsanforderungen wurden
folgende Normen und/oder technische Spezifi kation(en)
herangezogen:
EN 60335-1:2012+A11:2014+A13:2017
EN 50636-2-100:2014
EN 62233:2008
EN 55014-1:2017
EN 55014-2:2015
EN 50581:2012
16
Konformitätsbewertungsverfahren nach
2000/14/EC geändert nach 2005/88/EC Anhang V.
Gemessener Schallleistungspegel
Laubbläser: 98,7 dB (A), K=3 dB (A)
Garantierter Schallleistungspegel 102 dB (A)
Das Baujahr ist auf dem Typenschild aufgedruckt und
zusätzlich anhand der fortlaufenden Seriennummer
feststellbar.
Münster, 02.03.2020
Matthias Fiedler
Senior Product Manager
Ikra GmbH
Aufbewahrung der technischen Unterlagen:
Matthias Fiedler, Ikra GmbH, Schlesierstrasse 36,
64839 Münster, Germany
TECHNICAL DATA
Cordless Leaf Blower / Leaf Vacuum
Rated voltage
No-load speed
Air speed
Air delivery rate max
Collection bag capacity
Weight without battery (Leaf Blower / Leaf Vacuum)
Noise information
Measured according to
1)
EN 15503, Uncertainty K = 3 dB (A);
Sound pressure level L
1)
pA
Sound power level L
2)
WA
Vibration information
Vibration total values (triaxial vector sum) determined according to ISO EN 15503,
Uncertainty K =1,5
Vibration emission value a
h
Compatible batteries
Compatible chargers
Compatible fast-chargers
Subject to technical alterations and amendments.
Warning: The declared vibration emission level represents the main applications of the tool. However if the tool is used
for diff erent applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
SAFETY
Read and understand the operating instructions
before using the appliance. Familiarise with the control
elements and how to use the appliance properly. Abide by
all the safety measures stated in the service manual. Act
responsibly toward third parties.
The operator is responsible for accidents or risks to third
parties.
EN
ENGLISH
ALS 40
40 V
max 2300 min
-1
max. 216 km/h
max. 8 m³/min
20 l
3,2 kg/2,2 kg
2)
2000/14/ EG;
89,6 dB (A)
102 dB (A)
<2,5 m/s
2
R3-360-AH-U-01
R3-360-1A-02
R3-360-3A-02
In case of any doubts about connection and operation
refer please to our customer center
You can also download these instructions in digital form
on the internet on our homepage.
17
Publicité
Table des Matières
