Residual Risk - Okay ALS 40 Mode D'emploi

EN ENGLISH
WARNING
Risk of injury by rotating impeller.
• Keep your hands in safe distance.
• Never use the machine with a damaged cover or protec-
tive device or without cover or protective devices.
• Remove the battery pack before starting any adjust-
ment, cleaning and maintenance work on the device.
• Wait until all rotating parts have stopped and the appli-
ance has cooled down.
When operating the machine, ensure that it is positioned
securely, in particular on slopes.
Avoid abnormal body posture.
Walk! Never run!
Be careful when going backwards – risk of tripping!
When working, keep the appliance fi rmly with both
hands and with a distance from your body.
When feeding material, never stand on a level higher
than the level of the base of the machine.
Before starting the machine, make sure that the feeder
is empty.
Keep your face and body away from the feeding chute.
Do not allow hands, other parts of the body or
clothing to be placed in the feeder, in the ejection
channel or near moving parts.
Do not stand in the ejection zone when operating the
machine.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in
confl ict with the designation and it is prohibited
to attach any protective equipment of other
manufacturers.
Always switch the machine off before attaching or
removing the collection bag.
Switch the machine off if it becomes blocked, before

RESIDUAL RISK

Despite the observance of the operating instructions there
still may be some hidden residual risks.
DANGER
This power tool generates an electromagnetic fi eld during
operation. Under certain circumstances, this fi eld may
aff ect active or passive medical implants. To reduce the risk
of serious or fatal injury, we recommend that individuals
with medical implants consult your physician and the
manufacturer of the medical implant before operating the
machine.
20
removing the blockage. Do not transport the machine
if the energy source is running.
Remove the rechargeable battery before carrying
out any setting, cleaning or maintenance work on the
device.
WARNING
If the appliance starts abnormally vibrating, switch
the engine off and search for the cause immediately.
Generally, vibrations are a warning against operating
failure.
Stop the device and disconnect it from the power supply
• whenever you leave the lawnmower
• before removing blockages
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the device
for damage
Removing blockages
In the event of a blockage, switch the device off immedi-
ately and wait until the machine has stopped completely.
Then remove the object.
Maintenance and storage
Switch the machine off and do not touch any moving,
dangerous parts. Wait until the movement has
stopped completely and the device has cooled down.
when you inspect the machine for damage;
if you are replacing or repairing damaged parts;
if you check for loose parts and tighten them;
CAUTION
Damage to health arising from vibrations to hand
and arms if the device is used for a long time or if the
device is not guided and evaluated properly.
Vibration damping systems are no guaranteed protection
against white fi nger disease or carpal tunnel syndrome.
Therefore, it is necessary to carefully check the state of
your fi ngers and wrist if you have regularly used the appli-
ance for a long time. If any symptom of the diseases above
appears, seek medical advice immediately. To reduce the
white fi nger disease risk, keep your hands warm and take
regular breaks during your work.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the running
= Cutting-Line
unit may cause hearing damage. Wear ear protectors.
When working with the device, a certain level of noise
cannot be avoided. Noisy work should be scheduled for
= Cutting-Line
hours, during which it is allowed by statute or other local
regulations. Adhere to any applicable rest times and limit
your working time to the necessary minimum time. For
your personal protection and the protection of people
nearby, suitable hearing protection must be worn.
Please observe the following: according to the German
Machine Noise Protection Regulation from September
SYMBOLS
38x10mm
Warning / Caution!
38x10mm
Warning! Please read the instructions carefully
before starting the machine.
20V
LBB 202
2,0Ah
Warning against thrown-off items
40Wh
20V
LBB 202
2,0Ah
Do not let other persons get near due to
foreign objects being thrown off .
40Wh
20V
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
2,0Ah
Risk of injury by rotating impeller.
45
40Wh
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
Keep hands and feet away. www.ikra.de
54,5x24,5mm
Ikra GmbH, Schlesierstraße 36, D-64839 Münster, Germany
Do not expose tools to rain. Do not use tools in
www.ikra.de
CE 5 x 7 mm
damp or wet locations.
54,5x24,5mm
CE 5 x 7 mm
Wear goggles.
Wear ear protectors.
Wear safety cut through resistant shoes with
safety sole and steel toe !
Wear protective gloves !
Guaranteed sound power level
XX
Remove the battery pack before starting any
adjustment, cleaning and maintenance work
on the device.
2002, this device may not be operated on Sundays
= Cutting-Line (do not prin
and Bank holidays or working days from 8pm to 7am.
Furthermore, it is forbidden to operate the machine at the
following times of day: from 7 a.m. to 9 a.m., from 1 p.m. to
(do not print !)
3 p.m. and from 5 p.m. to 8 p.m.
Please do also consider any local regulations concerning
noise protection!
(do not print !)
Keep noise and vibration to a minimum!
• Only use devices that are in a fl awless condition.
• Maintain and clean the device on a regular basis.
• Adapt the way you work to the device you are using.
• Do not overload the device.
• Have the device checked if required.
• Switch off the device when it is not being used.
• Wear protective gloves.
38x10mm
Please read the instructions carefully before
starting the machine.
LBB 202
Typ LI 22
Made in China
Protect the battery against temperatures above
Typ LI 22
45°C.
45
Made in China
Protect the battery against heat and fi re..
Typ LI 22
201x
45
Made in China
Protect the battery against water and moisture.
www.ikra.de
54,5x24,5mm 201x
Output voltage
V
Direct Current
CE 5 x 7 mm
Output current
201x
Input voltage / AC Current
~
Mains frequency, Rated input
Safety class II
Only use the device indoors.
Fuse
European Conformity Mark
EN ENGLISH
91
91.7x1
91
91.7x1
21