Publicité
OPERATING INSTRUCTION
Display Screen
Power Function
♦
♦
When power OFF, unit will be stopped, if heater is working before power OFF the unit, fan will have 20 seconds
delay to ensure heat will not be trapped inside the unit.
♦
Heater Lock
Activate Heater Lock
When the unit is ON, hold the POWER button for 10 seconds to activate the Heater Lock function. E3 will
be displayed and a beep sounds 3 times to indicate the Heater Lock function has activated, only heater
function key is locked. When pressing Heater button, E3 will be displayed that indicate the Heater Lock
function activate.
Inactivate Heater Lock
To inactivate the Heater Lock function, hold the POWER button for 10 seconds.
Note: Heater lock function is only available if using the control panel.
Note:This unit has a memory function that allows you to turn off the MAIN POWER and retains all the other
function settings (excluding the TIMER function).
Flame Color Function
♦
The flame Color Button should be used to set the flame color: C1,C2,C3,C4,C5,C6,C7.
Setting
C1
C2
C3
C4
C5
C6
C7
♦
Default function: Hold down Flame color button for 10 seconds, blink "00" for 5 times and beep for 3 times, the
machine will automatically shut down. Restart the machinne, the default settings will be restored.
(Default function is only available if using the control panel.)
Automatic color change (C2-C7 fades in and out per 10 seconds)
Yellow+Orange+Blue
Yellow+Orange
Orange+Blue
Yellow
Blue
Orange
Power
Flame
Color
PAGE 8 OF 12
Heater
Timer
Publicité
