Publicité
GB
CHARGING INSTRUCTIONS
CHARGE THE DEVICE FOR 3 HOURS BEFORE FIRST USE.
Charging without using the charger
1. Connect the device connector plug (6) to the socket on the
device.
2. Check whether the device is switched off. Now plug the
power adapter (5) into the socket.
3. During the charging process, the charging symbol (11)
light up.
4. After the charging is complete, the charging process is
automatically stopped.
5. Unplug the power adapter (5). The HairMaster®TRIMMER is
now ready for use.
Charging using the charger
1. Please plug the tie-in (6) into the charge stand slot (17).
2. Then please stand trimmer on the charge stand (17).
3. Please check if the power switch ist off, and then plug the
adapter (5) into the power slot.
4. When charging mode (11) turns on, it means being charged.
LED indicator
remaining power
on
1%~30%
on
30%~100%
fully charged
off
14
LOW
HIGH
off
flashes
on
flashes
on
on
DANGER OF ELECTRIC SHOCK! Never
touch the device with wet hands when
connected to the power supply.
IMPORTANT!
1. The device should never be left unattended when it is
plugged in.
2. The charging time is approx. 1 hours. The device operating
time can be maximized after the battery has been charged
and discharged through use 3 or 4 times.
3. After charging and using 400 times, the battery power can
decrease to 80%.
4. The hair trimmer will become warm during use and while
charging.
5. Do not use any extension cables with this device.
START-UP
Charge the device for 3 hours before first use.
Before initial use, let the device run for about 3 – 5 minutes.
Due to the manufacturing process, a slight odor may be
noticed. This is harmless and only occurs when used for the
first time.
OPERATION
Display symbols
3
Speed
speed level
indicator
speed
5000RPM
4
Indications during use
LED indicator
remaining power
off
100%~30%
off
30%~5%
<5%
flashes
5500RPM
6000RPM
LOW
HIGH
on
flashes
off
flashes
off
off
Publicité
