Publicité
ASSEMBLY AND DISASSEMBLY OF BEATERS
WARNING: When assembling, disassembling or cleaning the appliance, make sure it is off
and unplugged.
- Position the speed selector (B) on the position "0".
- To fit the beaters, hold the appliance by its handle and insert the stem of each beater into the
provided holes on the appliance body by slightly rotating them until a click is heard (Fig.1).
The dough hooks (C) are different: the one having a metal ring on the stem is to be mounted into
the larger hole (Fig. 2).
- Press the releasing button (A) to remove the beaters.
HOW TO USE THE MIXER
- Position the speed selector (B) on the position "0".
- Insert the required beaters, as previously described.
- Plug the power cord into a socket.
- Put the ingredients into a bowl.
- Immerse the beaters in the center of the mixture, turn on the appliance and start mixing at the
lowest speed increasing it gradually until the required speed is reach.
- After the mixing process or in case it is required to add other ingredients to the mixture or to
change the beater type, move the switch (B) to its original position "0", unplug the appliance and
release the beaters.
- Observe the max time of 60 continuous seconds (using speed "Turbo") for preparing the recipe or
allow the appliance to rest for longer preparations.
WARNING: Should the appliance slow down excessively while operating, select a higher
speed or reduce the amount of mixture to be processed. In case of very thick mixtures, it is
also possible to use the "Turbo" speed via the selector (B).
USING CHOPPER ATTACHMENT
(if supplied)
Install the appliance onto the chopper attachment
Pig skin chopping times
Pig skin
Quantity
200 g MAX
Speed
"Turbo" for
5 seconds
MAX
- 7 -
EN
Publicité
