Publicité
UK
DE
CN
FR
ES
For stereo and home cinema we recommend that you position the loudspeakers
symmetrically around your favorite listening position to achieve optimum soundstage
(see figure 1A + 1B + 1C). To avoid compromising clari from the loudspeaker, it is
also important, that you do not position the speaker too far away from the listening
position. We recommend that the greatest o axis listening angle is 45 degrees
(measured between the center axis of the loudspeaker and the listening position
– see figure 2).
In a distributed sound system setup it is important, that the loudspeakers are
positioned so that the main area of the room(s) is covered with sound (see chapter
4.4). To achieve an even sound coverage, the loudspeakers should be installed
evenly in the room(s) (see figure 3).
Objects positioned between the loudspeaker and listening position might negatively
a ect the sound quali . The PHANTOM E-series is designed to meet our wide
dispersion sound principle. By using loudspeakers with wide dispersion technology,
the distortion in the main listening area will be lowered and the room integration will
be be er. The wide dispersion principle will also ensure that sound is spread evenly
within a large area in the listening room.
Every room has its own distinctive acoustics, which influence the way we experience
sound from a loudspeaker. The sound you hear consists of both direct sound from
the loudspeakers and reflected sound from the floor, ceiling and walls. The la er
will a ect how you experience the sound. As a basic rule, try to avoid large, hard
and reflective areas in the immediate vicini of your loudspeakers as it will pically
cause strong reflections, which might disturb the precision and spatial e ect of
the sound reproduction. So items such as carpets, curtains etc. might help if the
sound is too bright.
Both the amount and quali of the deep bass depend on the size and shape of the
room, and the position of the loudspeakers. Positioning the loudspeakers near a
side or back wall will accentuate the bass. A corner location will accentuate it even
more, but will also increase the reflections.
4.1 Mounting the dogleg brackets
DALI PHANTOM E-series incorporates dogleg brackets for ceiling/wall mounting.
The brackets a ach the loudspeaker firmly to the rear of the surface on which
it is mounted. The dogleg brackets extend out at a 90-degree angle when the
screws are tightened (see figure 4). The screws should be tightened so that the
loudspeaker sits securely in place – but be careful not to over tighten the screws.
To tighten the screws, use an appropriate bit. The bit should be used with a hand
bit screwdriver or a drilling machine with build-in torque se ing. If using a drilling
machine, set the torque to the minimum se ing. The screws are appropriately
tightened, when the gasket on the rear of the loudspeaker is compressed and the
bezel of the loudspeaker is flush with the mounting surface.
If you need to remove the loudspeaker, loosen the screws approximately 5 to 20
turns counter clockwise and the brackets will loosen their grip. NOTE: do not
unscrew more than 20 to 25 turns or the brackets may fall o the screws.
9
Publicité
