Abus TVCC80000 Mode D'emploi page 36

Cable guide hole
2.10 Installing the Speed Dome in the mounting plate
2.10.1 Lay the cables for the Speed Dome and align the bottom side of the Speed Dome with
the mounting plate as shown in the diagram.
2.10.2 Push the Speed Dome upwards and then to the front in the direction of the arrow. As
soon as the Speed Dome is in the correct position, the spring automatically engages in
the mounting plate.
To complete installation, remove the protective film from the dome.
Screw holes
Alignment
36
2
Push to the front
1 Push upwards
Spring
English
Locking
mechanism