Publicité
Step 1: Connecting the cables
• Erect the all antennae upright to ensure optimised Wi-Fi
• If the indicator stays red, this indicates that the router is not connected to the Internet.
Please refer to "Step 2: Configuring the network settings".
• For routers that support WAN/LAN auto-adaptation, the network ports are WAN/
LAN combo ports. You can also specify a fixed WAN port on the router's web-based
management page.
POWER
1
2
3
WPS/RESET
1000M WAN/LAN
WAN
Optical/Broadband/cable modem
(from your broadband provider)
®
signal.
2
POWER
RESET
LAN
Internet
LAN
PON
Publicité
