CONTINENTAL EDISON CERPC8PERS Guide D'utilisation page 20

• THE APPLIANCE MUST NOT BE USED IF IT HAS BEEN
DROPPED, IF IT HAS ANY VISIBLE DAMAGE, IF IT LEAKS
OR IF IT FUNCTIONS ABNORMALLY IN ANY WAY.
• ALWAYS UNPLUG THE APPLIANCE IF NOT USING IT FOR A
PERIOD OF TIME.
• REMOVE ALL PACKAGING AND DO NOT LEAVE THE
PACKAGING
POLYSTYRENE AND ELASTIC BANDS IN EASY REACH OF
CHILDREN AS THEY MAY CAUSE SERIOUS INJURIES.
• AFTER UNPACKING YOUR APPLIANCE, MAKE SURE YOU
HAVE PUT IT ON A FLAT, STABLE AND HEAT-RESISTANT
SURFACE. CHECK YOU HAD LEAVE ENOUGH SPACE
BETWEEN YOUR APPLIANCE AND SURROUNDING WALL
TO LET THE AIR CIRCULATE AROUND.
• CHECK THAT THE VOLTAGE MARKED ON THE RATING
PLATE MATCHES TO YOUR LOCAL SUPPLY. IF NOT THE
CASE, DO NOT USE THE APPLIANCE AND SEEK FOR
EXPERT ADVICE.
• TAKE ALL NECESSARY MEASURE WITH CORDS AND
EXTENSIONS TO AVOID ANY INJURIES WHILE IN USE.
• FOR YOUR OWN SAFETY, WE RECOMMEND YOU NEVER
LEAVE THE APPLIANCE IN A PLACE THAT IS EXPOSED TO
HUMIDITY OR INCLEMENT WEATHER CONDITION.
• DO NOT PUT THIS APPLIANCE ON TOP OF OTHERS.
• NEVER LEAVE APPLIANCE PLUGGED IN WHEN NOT IN USE.
• NEVER MOVE THE APPLIANCE WHEN IN USE.
• THE SUPPLY CORD SHOULD BE REGULARLY EXAMINED
FOR SIGNS OF DAMAGE AND THE APPLIANCE IS NOT TO
BE USED IF THE CORD IS DAMAGED.
• NEVER
PLUG
THERMOSTAT WITH WET HANDS. NEVER USE THE
APPLIANCE WITH BARE OR WET FEET.
• NEVER UNPLUG THE APPLIANCE BY PULLING THE
POWER CABLE. ALWAYS UNPLUG THE APPLIANCE FROM
THE MAIN SOCKET.
MATERIAL
THE APPLIANCE
SUCH AS
AND
PLASTIC BAGS,
TOUCH THE
20