Publicité
CONNECTION TO POWER SUPPLY
Your appliance must be connected to a power socked with grounded connection,
which is conform to the respective standards and has been installed by an
authorized specialist. Before you connect the plug of the appliance with the
Power socket, make absolutely sure that the voltage (V) on the appliance's
data-plate corresponds with that of your mains.
If the voltage differs, notify the after-sales-service or your dealer immediately, and do
not on any account connect the Appliance to the mains.
SWITCHING ON/OFF TEMPERATURE SELECTION(THERMOSTAT) (l)
The temperature control switches the appliance on and off and controls/sets the
cooling temperature.
To prevent temperature being accidentally modified, the control is intentionally
resistant to turning.
To vary the setting, we recommend using a coin or screwdriver.
To switch on: Turn the control (l) to the right adjust temperature to the level you
require, between:
- "1" (slight cooling) and
- "7" (lowest temperature)
To switch off: Turn the control to the left
Temperature settings must be according to:
- Ambient temperature of the appliance
- Quantity of stored foodstuff
- Frequency of opening
We recommend a medium setting. You will soon learn which is the most suitable
setting for your requirements.
INDICATOR-LIGHTS (M,N,O)
If your appliance is equipped with indicator-lights, the following guide explains what
is meant by each light up:
- Green = POWER
The appliance is under current and operating
The green power light must always be on when the appliance is connected to the
-
3
4
-
Publicité
