Publicité
Fingered Chord Fingering (C Key)
(The C key fingered chord fingering is as shown in the following figure, and
the rest can be oblained by analogy)
● Chord Timbre
During single chord or fingered chord accompaniment, you can press
[CHORD TIMBRE| to change the chord tone, and press [CHORD TIMBRE]
again to resume the original chord tone.
VI. Status memory function
With the status memory function, you can save the tone, rhythm, tempo and
other parameters to be changed during playing, for fast shifting. This
keyboard is equipped with 3 status memories, which can be flexibly called at
any time during playing
● Storage of status memory
Set the tone, rhythm, tempo and chord as required, and then press the
[MEMORYJ] button and one of buttons from [MEMORY 1] to [MEMORY
3] to save the current status.
● Calling of status memory
Press any one of buttons from [MEMORY 1]to [MEMORY 3] to call the
setting parameters saved under this memory to replace the current status.
※ No power failure prote ction is provided for the saved conte nts, and the
saved contents will loss after the electronic keyboard is restarted after power
cut.
10
VII. Effect Control
● Transpos ing function
With the transposing function, you can play musicof other tunes with C-tune
fingering method. Press the [TRANSPOSE - ] to decrease the tone by
half-tone (minor second), and the tune in C-tune keybaard zone will change
to B-tune. Press the [TRANSPOSE + ]to increase the tone by half-tone
(minor second), and the tune in C-tune keyboard zone will change to #C tune
or bD tune. When pressing the [TRANSPoSE - ] for twice, C-tune will shift
to bB-tune,
when pressing the [TRANSPOSE + ] for five times, C-tune will shift to
F-tune. Press [TRANSPoSE + ] and [TRANSPOSE - ] simultaneously to
recover to C-tune "00". Press [TRANSPOSE + ] and [TRANSPOSE - ] to
adjust the level from "P-6" to'P06".
● Sustain function
Press [SUSTAIN]. "SUS" will show an the display, and the sustain effect will
be activated.
Press this button again to disenable the sustain effect.
● Vibrato function
Press [VIBRATO]. "VIB" will show on the display, and the vibrato effect will
be activated.
Press this buttan again to disenable the vibrato effet.
● Keyboard splitting function
Press [SPLIT] to enable the keyboard splitting function, "SPLIT" will show
on the display. 24 keys on the left of the keyboard will split with the
remaining keyboard. While the left keyboard zone will increase by one octave
and maintain the original tone, the right keyboard zone will decrease by one
octave to maintain the same pitch with the left keyboard zone. The tone of
the right keyboard zone can be set as needed so different tones can be played
by the left and right keyboard zones at the same time. Press [SPLIT] again to
disenable this function.
11
Publicité
