LENCO CR-615 Mode D'emploi page 10

FM broadcast information
Press MENU/INFO (5) button to view:
Top line:
Station name, reception type.
Bottom line:
a. Information (provided by the radio station).
b. information relating to the type of program broadcast.
c. Frequency.
d. Stereo/mono.
e. Time.
f. Date.
FM Menu
1. In FM mode, hold down the "MENU/INFO" button (5) for a few seconds.
2. Turn the "VOLUME/SCROLL/ENTER/SNOOZE" dial (6) to select the desired item from:
Preset Recall, Preset Store, Scan Setting, Audio setting, System.
3. Press the "VOLUME/SCROLL/ENTER/SNOOZE" dial (6) to select the desired item and
enter its settings.
A) Scan setting
1. All Stations
2. Strong Stations
B) Audio setting
1. Stereo Allowed
2. Forced Mono
C) System
1. Sleep – Choose between OFF, 15, 30, 45, 60, 90 minutes
2. Alarm - To set Alarm 1 and Alarm 2.
3. Time:
4. Language – English, Deutsch, Italiano, Francais, Nederlands, Espanol, Dansk, Portugese.
5. Factory reset – No or Yes
6. SW version
Projection
Power ON/OFF and adjustment
1. Press the "Projection ON/OFF" button (9) to switch on the projection.
2. Press the "180° FLIP" button (10) to rotate the projection 180° if necessary.
3. Press the "Projection ON/OFF" button (9) to switch off the projection.
Dimmer
Press the DIMMER button (2) several times to change the display light.
‐ Set Time/date
‐ Auto update - Automatic update of date and time from source
or Off. It is advisable to keep it set to "Update from DAB" to
avoid continuous time shifts.
‐ Set 12/24 hour - Set AM/PM or 24-hour.
‐ Set date format - DD MM YYYY, MM DD YYYY