Publicité
Make sure the front pins are fully
seated in the holes, then push
OWNER'S MANUAL | ASSEMBLY GUIDE
the griddle top forward to lock
the griddle in place�
set the griddle on its feet� Place the griddle top and hood on
STEP 02
the griddle body by aligning the four (4) pins to the holes of the body�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❷ ❷
❶ ❶
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Install the control knob by pushing it into place in the oFF
STEP 04
position�
06
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Use the two (2) M6x12 screws pre-installed in the hood
STEP 03
handle to attach the hood handle grommets and the hood handle to
the front of the hood�
Make sure the front pins are
seated in the holes, then push
the griddle top back�
❶ ❶ Place the two front pins into
the front locking holes and push
the griddle top back�
❷ ❷ Then, set the two rear pins
into the rear holes�
Hang the grease cup in the slot on the back of the
STEP 05
griddle body�
Models: 2406 • 2407 • 2408 • 2412
BLACKSTONEPRODUCTS.COM
Publicité
