Models: 2406 • 2407 • 2408 • 2412
IGNITIoN INsTRUCTIoNs
1. CHECK VALVES
ensure gas is off at the supply shut off valve before checking
appliance valves�
Turn all knobs to the ❶ ❶ oFF position�
STEP 01
Push in knob and release� Knob should spring back�
STEP 02
If knobs do NoT
If knobs
do NoT spring back, replace valve assembly before using appliance.
spring back, replace valve assembly before using appliance.
Rotate knob to loW then turn back to oFF� Knob should
STEP 03
turn smoothly�
2. PIEzO-ELECTRIC GRIDDLE IGNITION
❶
❶ Push the control knob in to
start gas flowing�
❷ ❷ Turn the control knob
counter-clockwise to activate
the starter�
❸ ❸ Adjust the temperature to
desired level�
BLACKSTONEPRODUCTS.COM
❶ ❶
❷ ❷
❸ ❸
USING YOUR BLACKSTONE
3. ALWAYS CHECK BURNER FLAME BEFORE USE.
light burners and look below the cooking surface to view burners�
When knob is at HIGH, flames should be larger than when knob
is at loW�
HEALTHY FLAME PATTERN
❶
❶
❷ ❷
❸ ❸
❶ ❶
Flickers of yellow.
Flickers of yellow.
❷ ❷
dark blue.
dark blue.
❸ ❸
Vibrant blue.
Vibrant blue.
If burner does not ignite with open gas supply valve, gas
will continue to flow out of burner and could accidentally/
inadvertently ignite with risk of injury.
If ignition does not occur in 5 seconds:
1. Turn the burner control knob OFF.
2. Wait 5 minutes.
3. Repeat the lighting procedure.
If burner does not ignite, please reference the Troubleshooting chapter.
If burner does not ignite, please reference the Troubleshooting chapter.
| OWNER'S MANUAL
YELLOW OR IRREGULAR
❶ ❶
❷ ❷
❸
❸
If flames are yellow or irregular,
If flames are yellow or irregular,
please reference the Troubleshooting
please reference the Troubleshooting
chapter.
chapter.
WARNING
3. A
ligh
is at
HEA
❶ ❶
F F
❷ ❷
d d
❸ ❸
V V
If b
wi
in
If
1. T
2. W
3. R
If bu
If bu
09