Publicité
9246737
CARE & MAINTENANCE
1.
Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2.
Inspect the tool components periodically. Repair or replace
damaged or worn components. Only use identical replacement
parts when servicing.
3.
Check the mounting bolts regularly to ensure they have not come
loose or are damaged.
4.
Keep the tool clean, dry and free from oil/grease at all times.
5.
Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.
CLEANING
Periodically remove the jaws and clean them.
1.
Locate the jaw screws (#8) (Fig. 5).
2.
Unscrew and remove the jar screws.
3.
Remove the serrated jaw.
4.
Clean with a damp cloth or soft brush.
5.
Replace the jaws and secure the screws.
LUBRICATION
Inspect and lubricate the tool when required.
Only use light oil to lubricate the tool. Other lubricants may not be
suitable and could damage the tool or cause a malfunction during use.
When not in use for an extended period, apply a thin coat of lubricant to
the steel parts to avoid rust. Remove the lubricant before using the tool
again.
NOTICE! NEVER use a penetrating oil to lubricate the tool.
Penetrating oil may act as a solvent that will break down the
grease and cause the tool to seize up.
8
ADI Industrial Swivel Bench Vise
For technical questions call 1-800-665-8685
V1.1
Fig. 5
Publicité
