Publicité
USING THE PRODUCT
CONTROL PANEL
SPECIFICATIONS:
- Distance: 0-99.99 Km
- Calories: 0-999.9 Kcal
- Odometer: 0.00-999.9 Km
- Pulse: 40-240 BPM
- Speed: 0.0-999.9 Km/h
- Time: 00:00-99:59 Min:Sec
KEY FUNCTIONS:
- MODE: Press this key to select the function of your choice. Every
time that you will press this key, an arrow will indicate the function
that it is shown on the screen display at that moment. Should you
select the SCAN function, the screen display will change every few
seconds to show you the different functions (Distance, Calories,
Odometer, Pulse, Speed, Time).
Press this key for 4 seconds to reset all values to zero.
- SET: It allows the user to establish the desired values for the
Distance/Calories and/or Time exercises.
- RESET: Reset the value to zero by pressing the key.
FUNCTION:
- Distance: Accumulate the distances while exercising.
- Calories: Displays calories consumed while exercising.
- Odometer: Shows the total distance rode on the bike.
- Pulse: Shows the user pulse in real time.
- Speed: Displayed the current speed.
- Time: Displays work out time lapse while exercising.
- Scan: Scan through each function between: Distance, Calories, Odometer, Pulse, Speed and Time.
OPERATION PROCEDURES:
Auto ON/OFF
To conserve power, t he monitor will automatically shut off if there is no speed signal sensed or no key pressed in 4
minutes. The monitor will be auto-powered when the exercise begins or at any key press.
BATTERY:
If there is an improper display on the monitor, Please replace the batteries or change new batteries. This monitor uses
two "AA" batteries. Always replace both batteries at the same time.
40
Publicité
