Publicité
Before starting to assemble we recommend to look for a place with sufficient space. Use a floor protection.
Remove all parts from the carton and spread them on the floor. Check according to the checklist, if all parts
are complete. Perhaps some parts are already pre-assembled for your convenience. We recommend to use
the provided tools to set-up this device and to set-up the device with 2 persons.
STEP 1
Fix the front stabilizer (07) on front part of main
frame (01) with screws (20), flat washers (40) and
nuts (16) as shown. Then fix the rear
stabilizer (08) on rear part of main
frame (01) with screws (20), flat
washers (40) and nuts (16).
All manuals and user guides at all-guides.com
Part no.
01
02
03L/04L
Pedal Tube(L) / Lower handlebar (L)
03R/04R
Pedal Tube(R) / Lower Handlebar (R)
05L/R
Upper Handlebars L/R
06
Stationery Handlebars
07
08
18
21
Allen Screw M6x15L
22
Allen Screw M8x30L
23
24
25
26
Hex Head Bolt M8x45L
27/32
Decorative covers for handle bar joint (L)
28/33
Decorative covers for handle bar joint (R)
34/35
Decorative covers for Pedal Tube Joint L/R
37/38
Decorative covers for Pedal Tube Joint L/R
40
Flat Washer ø8.5xø16x1.5t
41
Decorative cover for Stationery Handlebars
43
31
ASSEMBLY INSTRUCTIONS
Description
Main frame
Front post
Front stabilizer
Rear stabilizer
Carriage bolt
Nylon nut
Computer
Pedal
PVC cap
Box Wrench
Allen key
Q´ty
1
1
1/1
1/1
1/1
1
1
1
4
4
2
6
1
2
6
1/1
1/1
1/1
1/1
6
1
6
2
1
Publicité
