Télécharger Imprimer la page

ETNA RBT1154 Serie Manuel D'utilisation page 116

Masquer les pouces Voir aussi pour RBT1154 Serie:

Publicité

Appliance interior equipment
Glass shelves
1
2
Bottle rack
2
Fruit and vegetable drawer with humidity control
The drawer at the bottom of the refrigerator is intended for storing fruit and vegetables. It provides
humidity and prevents the food from drying out.
The bin has integrated humidity regulator which allows setting the humidity level.
20
You can lay out the empty shelves to your liking across the guides in the
refrigerator interior without having to remove them from the refrigerator.
To move the shelf or take it out from the refrigerator, slightly lift it at the
back, pull it towards you, and then either move it or take it out of the
appliance. Store quickly perishable food at the back of the shelf where
the temperature is the lowest.
The bottle rack can contain a maximum load of nine 0.75-litre bottles or
13 kilograms of total weight. Also cans can be put on the bottle rack
(lengthwise or crosswise). Make sure that the door can close correctly
1
if you have put bottles or cans on the rack.
The bottle rack cannot accidentally be pulled out. It can only be pulled
out when it is empty. To pull it out, lift it slightly at the front (1) and pull
it towards you (2).
Slider position to the right: closed vents, higher humidity in the bin.
Slider position to the left: open vents, lower humidity in the bin.
If you observe droplets accumulating below the glass shelf, open the
vents and wipe the shelf (see chapter Faults table).

Publicité

loading