Publicité
Table of Contents
PREPARATION
myQ Serial Number ...................................2
Safety Symbol and Signal Word Review ...2
Unattended Operation ...............................2
Planning ....................................................3
Before You Connect with Your Smartphone
4
Preparing Your Garage Door .....................5
Tools Needed ............................................5
Carton Inventory .......................................6
ADJUSTMENT
Identify Door Profile ..................................7
Set Door Profile ........................................7
Program the Travel ...................................8
Automatic Force Set Up ............................8
Preparation
myQ Serial Number
Write down the following information for future reference:
myQ Serial Number:
Product Serial Number:
Date of Purchase:
Safety Symbol and Signal Word Review
This garage door opener has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in
strict accordance with the instructions and warnings contained in this manual.
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with the
warnings that accompany them. The hazard may come from something mechanical or
from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility of
damage to your garage door and/or the garage door opener if you do not comply with the
cautionary statements that accompany it. Read them carefully.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause
cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Unattended Operation
The Timer-to-Close (TTC) feature, the myQ Smartphone Control app, and myQ Garage Door and Gate Monitor are examples of
unattended close and are to be used ONLY with sectional doors. Any device or feature that allows the door to close without being in the
line of sight of the door is considered unattended close. The Timer-to-Close (TTC) feature, the myQ Smartphone Control, and any other
myQ devices are to be used ONLY with sectional doors.
Smart LED Light must be installed to enable use of Timer To Close or myQ Smartphone Control of the door.
Test the Safety Reversal System ...............9
2
Test the Protector System
ADJUSTMENT
Test the Power Door Lock .......................10
Test the Emergency Release ...................10
OPERATION
Using Your Garage Door Opener .............12
Connect With Your Smartphone .............13
Using the Door Control ...........................14
Using the Remote Control .......................15
7
PROGRAMMING
Program the Smart LED Light .................17
To Erase the Memory ..............................17
HomeLink
®
..............................................18
2
MAINTENANCE
®
.......................9
Care of Your Garage Door Opener ...........19
10
TROUBLESHOOTING
Diagnostic Chart .....................................20
Additional Troubleshooting .....................21
11
REPAIR PARTS
Installation Parts .....................................23
Garage Door Opener Assembly Parts ......24
CONTACT INFORMATION
WARRANTY
16
AUTOMATIC GARAGE DOOR OPENER
SAFETY & MAINTENANCE GUIDE
Serial Numbers
19
20
23
24
26
27
Mechanical
Electrical
Publicité
