Publicité
H O W TO U S E
CONTROL PANEL FEATURES - wM2501H*A
1
1
POwER ON/OFF BUTTON
Press to turn the washer ON. Press again to turn
the washer OFF.
NOTE: Pressing the ON/OFF button during a
cycle will cancel that cycle and any load settings
will be lost.
2
CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle. Once
the desired cycle has been selected, the standard
presets will be shown in the display. These
settings can be adjusted using the cycle settings
buttons anytime before starting the cycle.
START/PAUSE BUTTON
3
Press this button to START the selected cycle.
If the washer is running, use this button to PAUSE
the cycle without losing the current settings.
NOTE: If you do not press the START/PAUSE
button within 4 minutes of selecting a cycle, the
washer automatically turns off.
4
STEAM BUTTON
Press the STEAM button to add steam to the
selected cycle for added cleaning power.
NOTE: Steam can only be added to
the following cycles: STEAM FRESH™,
ALLERGIENE™, SANITARY, BULKY/LARGE,
COTTON/NORMAL, and PERM. PRESS
18
18
3
2
4
7
5
5
CYCLE SETTINgS BUTTONS
Use these buttons to adjust the desired cycle
options for the selected cycle.
DELAY wASH BUTTON
6
Press this button to delay the start of the wash
cycle. Each press of the button increases the
delay time by one hour, up to 19 hours.
TIME AND STATUS
7
The display shows the settings, estimated
time remaining, options, and status messages
for your washer.
OPTION BUTTONS
8
The option buttons allow you to select
additional cycle options and will light when
selected. Certain buttons also allow you to
activate special functions by pressing and
holding the button for 3 seconds.
For detailed information about the individual
options, please see the following pages.
6
8
Publicité
