Booting The System; Starting Windows The First Time - Fujitsu LifeBook MH380 Guide D'utilisation

Entering the BIOS Setup Utility
To enter the BIOS Setup Utility do the following:
1
Turn on or restart your notebook.
2
To enter the BIOS Setup Utility, press the [F2] key once the Fujitsu logo appears on the screen. This will open
the main menu of the BIOS Setup Utility with the current settings displayed.
3
Press the [RIGHT ARROW] or [LEFT ARROW] key to scroll through the other setup menus to review or alter
the current settings.
The Boot Menu can also be invoked by pressing the [F11] key when the Fujitsu logo appears on the screen.
BIOS Guide
A guide to your mini-notebook's BIOS is available online. Please visit our service and support website at
http://www.computers.us.fujitsu.com/support, then select User's Guides under Online Support. Select
your Product, Series, and Model, then click [Go]. Under the Manuals tab, select the BIOS Guide.

Booting the System

We strongly recommend that you not attach any external devices until you have gone through the initial
power on sequence.
When you turn on your notebook for the first time, it will display a Fujitsu logo on the screen. If you do
nothing the system will load the operating system, and then the Windows Welcome will begin.

Starting Windows the First Time

Before you use your new system, please be aware of the following points.
After you boot up the system the first time and follow the instructions on the screen, you will eventually
come to the Welcome window. After the Welcome window appears, the screen will black out for up to
several minutes. This is normal. DO NOT ATTEMPT TO POWER DOWN THE SYSTEM AT THIS
POINT. While the screen is blacked out, your system configuration is being set up and the necessary files
are being installed.
44 - Starting Your LifeBook MH380 Mini-notebook