Best CP37 Serie Instructions D'installation page 11

17. REINSTALL BAFFLE FILTERS
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first and finish with center one(s).
1. Insert one end of the filter into the upper channel
of the power pack.
2. Raise the other end toward the inside of power
pack and insert in the grease drip rail of the
power pack.
18. LED LIGHT BULBS
This power pack requires dimmable LED bulbs (120 V, 20 W, MR16 with GU10 base), included.
NOTE: Before using lamps, remove shipping tape on them (if present).
1. Install the lamps by placing the bulb leads into their grooves in the socket.
2. Gently push upwards and turn clockwise until secure.
To remove lamps, gently push upwards and turn counterclockwise to disengage bulb leads
from their grooves.
NOTE: To ease removal of the bulbs, use a rubber dishwashing glove or use suction cup
tool available from Best. Contact Best Customer Service at 1-800-558-1711 to order
suction cup tool, part no. 99526707.
Scan the QR code for the brands, part numbers and sellers of the approved LED bulbs.
CAUTION
1
HD0299
11
2
1
HO0090
2