GE GTE21 Manuel D'utilisation Et Instructions D'installation page 6

Shelves and Bins
Not all features are on all models.
Rearranging the Shelves
REFRIGERATOR COMPARTMENT
Full Width Shelves
The shelf rests on a molded side-wall support and locks
into a track on the rear cabinet wall on each side.
To remove:
1. Lift the shelf up through the space in the track.
2. Slide the shelf forward along the track.
3. Pull the shelf out of the unit.
Track
Lift up
To replace:
Reverse removal steps above.
CAUTION
when they are cold. Glass shelves and covers may
break if exposed to sudden temperature changes or
impact such as bumping or dropping. Tempered glass is
designed to shatter into many small pieces if it breaks.
dishwasher.
6
Slide
forward
FREEZER COMPARTMENT
To remove:
1. Lift up both sides of the shelf and slide it left into the
center of the shelf supports.
2. Rotate the right side of the shelf up and out of the
shelf supports.
To replace:
1. Holding the shelf diagonally, insert the left end of the
shelf into the top of the shelf supports on the side wall.
on the side wall. Rest each end of the shelf on the
bottom of the shelf supports.
49-1000636 Rev.2