CIARRA Hood To Go Manuel D'instructions page 10

Maintenance Process

Note: After each use of Ciarra Hood To Go, please follow the procedure to replace the ﬁlters and clean the oil collecting cup.

Empty the oil collecting cup and rinse with detergent and water to avoid odor.

Filter Removing Process

1. Pull out the magnetic Filter Holder.

5. Then remove the Aluminum Filter.

2. Remove the Filter Holder.

6. Then remove the Polymer Filter.

3. First remove the

4. Then remove the Carbon Filter.

accessories.

7. Rinse the Aluminum Filter and Polymer Filter with

detergent and water, and dry them before assembling

them into the machine.