Publicité
Liens rapides
Towbar
6322
• Caddy
Montagehandleiding
Fitting instructions
Montageanleitung
Instructions de montage
Monteringsanvisningar
Montagevejledning
Instrucciones de montaje
Istruzioni per il montaggio
Instrukcja montażu
Asennusohjeet
Pokyny k montáži
Szerelési útmutató
Руководство для монтажа
Your perfect fit
brink.eu
Publicité
Manuels Connexes pour Brink 6322
Sommaire des Matières pour Brink 6322
- Page 1 Towbar 6322 • Caddy Montagehandleiding Fitting instructions Montageanleitung Instructions de montage Monteringsanvisningar Montagevejledning Instrucciones de montaje Istruzioni per il montaggio Instrukcja montażu Asennusohjeet Pokyny k montáži Szerelési útmutató Руководство для монтажа Your perfect fit brink.eu...
- Page 2 6322/4 M12x40 (10.9) 75Nm 632280 9520092 6322/4 6322/3 M12x65 (10.9) 110Nm 9530959 M12x65 (10.9) M12x40 (10.9) 110Nm 75Nm...
- Page 3 6322/4 M12x40 (10.9) 632280 75Nm 9520092 6322/4 6322/3 M12x65 (10.9) 95Nm 9530959 M12x65 (10.9) M12x40 (10.9) 95Nm 75Nm...
- Page 4 Fitting instructions Make: Peugeot 508 Saloon; 2011-> Type: 5414 Montage an lei ing Fitting instructions Montageanleitung Instructions de montage Monteringsanvisningar Montagevejledning Instrucciones de montaje Istruzioni per il montaggio Instr ukcja montaż u Asennusohjeet Po kyny k montáž i Sz erelési útmutató RU S оводство...
- Page 5 Couplingsclass: A50-X D-Value : euro 9,4kN Approved tested E11 55R 0111061 ECE R55 80 kg 10.9 MODIFICATION?
- Page 6 Copy of manufacturersplate...
- Page 7 * Should this installation process entail the cutting of the bumper – conformation MUST be obtained by the installation engineer of the customer’s acceptance prior to completion. Brink Towing Systems B.V. do not accept responsibility for any matters arising as a result of this miscommunication.
- Page 9 Disconnect...
- Page 10 x= ±20mm...
- Page 11 75Nm...
- Page 12 Disconnect...
- Page 15 • Per verificare l’idoneità del dispositivo di traino omologato a norma UN ECE R55, all’installazione sulla vettura su cui si intende procedere al montaggio, compilare la seguente formula (se neces- sario declassare la massa rimorchiabile): DA COMPILARE PER IL COLLAUDO DICHIARAZIONE DI CORRETTO MONTAGGIO: TIMBRO e FIRMA Si dichiara inoltre di aver informato l’utente del veicolo sull’USO e MANUTENZIONE del dispositivo stesso.