Publicité
Accessories
07-10900 .......Defibrillator Training Pads (for use with any training manikin)
M3871A.........FR2 Infant/Child Training Pads
M3753A.........Remote Control for AED Trainer 2 (optional)
M3754A.........Programming Kit for AED Trainer 2 (optional software and cable
for configuring trainer parameters, language, custom scenarios)
NOTE: The software is also available at no charge via the internet at
http://www.medical.philips.com/goto/Trainer2.
M3755A.........Training Pads for AED Little Anne and Resusci Anne with Laerdal
Link Technology
M3756A.........AED Little Anne Training System (AED Trainer 2, Instructions for
Use, carrying case, quick reference card, remote control, AED Little
Anne training manikin, and 1 set training pads for AED Little Anne)
Selecting Training Scenarios
You can select a standard training scenario either by using the optional
remote control or via the Up/Down buttons in the AED Trainer 2's
"set-up" mode. To activate the set-up mode, make sure the electrode pads
are not connected, then remove and reinsert the battery. Alternatively,
press and hold down the two blue Up/Down buttons while simultaneously
pressing the green On/Off button. When the Trainer is in set-up mode, the
operator display shows the currently selected scenario. To change the
scenario selection, use the Up/Down buttons to select the desired
scenario, then press the On/Off button to exit the set-up mode. The last
scenario selection is stored in the unit even if the battery is taken out.
NOTE: The Trainer 2 provides a CPR/patient care interval after each
shock delivery and each No Shock decision.
7
Publicité
