Item
Component
Maintenance method
If the brake is too tight/loose, use the 4
mm Allen key to loosen the screw on
the caliper. Then slightly adjust the
Brake
adjustment
brake line (decrease/increase the
exposed length), and tighten the
screw again.
Spin the wheels, the caliper should be
aligned with the rotor and they
Brake pads
shouldn't rub on the brake pads.
Squeeze the brake lever, the tail light
works normally.
Taillight
Check the headlight and see if it lights
Headlight
brightly.
Toggle the direction indicator button to
the left/right respectively, check if the
Direction
Function
direction indicators on the left/right
indicators
Inspection
side flash normally.
Power on the scooter, the dashboard
Dashboard
works properly.
Power on/off the scooter, the buzzer
Buzzer
sound is normal.
Horn(Only for
Press the horn button and the sound is
F2 Pro)
loud.
Ring the bell and the sound is loud.
Bell
Press and hold the throttle then release
it, checking for acceleration and
deceleration.
Throttle
Note: Release it, check if the throttle
will back to the position.
After connecting with the
Segway-Ninebot app: 1) Update the
firmware to the latest version. 2) Check
Fault
if the notification of the corresponding
detection
error code and possible causes will
prompt when the scooter detects an
error
Charge the scooter: 1) Check if the
current battery power displays on the
dashboard. 2) Check the LED indicator
Charging
on the battery charger.
Charging: red, Fully charged: green.
07
Every 3
Every 6
Every 12
Every 36
months
months or
months or
months or
every 310
every 621
every 9,230
miles (500
miles (1,000
miles (15,000
km)
km)
km)
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
Item
Component
Maintenance method
Press or toggle the button 3 times
Control
buttons
without failure.
Function
Test with left turns and right turns (the
Inspection
Turning
steering angle is 60).
No resistance or lag when turning.
The battery need to be replaced when it
is charged and discharged for 500
Battery
times or the total mileage is more than
assembly
6,213 miles (10,000 km).
Note: It is recommended to charge
Important
once every 60 days for long-term
parts
storage.
Controller
Hub motor
Front wheel
assembly
Throttle &
Brake lever
Front fork
Functional
After 3 years' or 9320 miles'
assembly
parts
(15,000 km's)riding, the
abnormal parts of the kickscooter
Folding
have to be repleced immediately.
mechanism
Brake disc
Disc brake base
Dashboard
Cover
Every 3
Every 6
Every 12
Every 36
months
months or
months or
months or
every 310
every 621
every 9,230
miles (500
miles (1,000
miles
(15,000 km)
km)
km)
√
√
√
√
√
√
08