Dovre 2576CBSC Installation Et Mode D'emploi page 42

2. Lift the damper (A) and remove the damper rod (B)
from the damper. Tilt the damper backward; see
next figure.
3. The damper is now loose. Take the damper out of
the appliance; see next figure.
16
4. To remove the baffle plate, first unscrew the bolt
(C). Loosen the nut; see next figure.
5. Lift the baffle plate on the front side, pull the baffle
plate forward and slide the baffle plate off the bolt;
see next figure.
6. The baffle plate is now loose. Carefully take the
baffle plate out of the appliance; see next figure.
Note: To fit the damper and the baffle plate, before
commissioning the appliance, follow the above
instructions in the reverse order.
Subject to change because of technical improvements