Changing The Oil - Jung JH 10 G-plus EX Mode D'emploi

5.2 Changing the oil

NOTE
Change the hydraulic oil annually.
For reliable function, JUNG hydraulic oil
is recommended (1 litre container, order
number 94 040 028-E).
1
2
> Open the lowering screw (1).
> Lower the lifting piston (3) completely.
> Pull out venting valve (2).
> Tilt the jack.
> Drain hydraulic oil into a suitable container.
> Refill JUNG hydraulic oil, paying attention to the
filling level.
Filling height: 25 mm up to top edge of the tank.
© JUNG Hebe- und Transporttechnik GmbH
Jack
JH 6 G plus
JH 10 G plus kurz
JH 10 G plus
JH 15 G plus
JH 20 G plus
>Stick on venting valve (2).
>Close the lowering screw (1).
3
NOTE
If you carry out maintenance yourself, then please
dispose of your waste oil according to the valid regula-
tions or send it to JUNG (free delivery) in the original
JUNG container. Disposal is free of charge.
Jacks of the JH / JH EX / JHS series
Oil volume
0,4 l
0,45 l
0,6 l
0,85 l
1,15 l
- 61 -