Publicité
FAN HEATER
12
CLEANING
- Disconnect the appliance from the mains and allow it to cool before
undertaking any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to
the inner parts of the appliance.
- Never submerge the appliance in water or any other liquid or place it under
running water.
- Note: When the device is started up in heating function, after being inactive
or only active in fan mode for a long period of time, it's possible that the device
emits a light amount of smoke. This is unimportant and means that the device
is burning dust and other particles that have collected in the fan heater. This
can be avoided by previously cleaning the interior of the device through its
gaps, with the help of a vacuum cleaner or high-pressure air blast.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical support service if product is
damaged or other problems arise. Do not attempt to disassemble or repair the
appliance yourself as this may be dangerous.
- If the connection to the mains has been damaged, it must be replaced and
you should proceed as you would in the case of damage.
This manual is available in digital format upon request to Customer Service by
calling the toll free number 800 015 748, available from Monday to Friday, 9.00
– 18.00.
Publicité
