Publicité
FAN HEATER
DESCRIPTION
A Function selector and power settings
B Thermostat Control
C Pilot Light
D Transport handle
INSTRUCTIONS FOR USE
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using the selection knob.
- The pilot light comes on.
- Select the desired speed.
- To avoid a fierce start up of the fan, it is advisable to start off from the
lowest speed position and, once the fan has been switched on, progressively
increase the speed to the desired position.
Fan Function:
- Select the fan position.
- Check that the thermostat control is turned up to the maximum.
Fan heater Function:
- Select the fan heater position.
- Select the desired heating power.
- Check that the thermostat control is positioned at the desired temperature.
Once you have finished using the appliance:
- Stop the appliance, selecting position 0 on the selector control.
- Unplug the appliance from the mains.
Carry handle/s:
- This appliance has a handle on the upper part of the body, which facilitates
comfortable transportation
Safety thermal protector:
- The appliance has a temperature safety device, which protects the appliance
from overheating.
11
Publicité
