Product Information; Important Handling Instructions; Device Features - asecos PURIFIAIR.488 Manuel D'utilisation

1. PRODUCT INFORMATION

1.1. IMPORTANT HANDLING INSTRUCTIONS

•
•
•

1.2. DEVICE FEATURES

A Housing
B & H Air intake (on both sides)
C
Control panel & display
D Fresh air (air outlet)
E & F Air quality indicator light
G
Handle
I
Water tank
J Display
K Control panel
If the humidity level in the room is too high, this may result in condensation on the air quality sensor.
If this occurs, although the air quality may already be very good, the status light on the control panel will still
indicate poor air quality. The device will then continue to work in automatic mode at a high output level.
In this case, we suggest selecting manual mode and setting the output level manually.
CAUTION: PLEASE NOTE!
›
Never touch the power plug with wet hands.
›
Ensure the power supply is turned off before cleaning the air purifier.
›
Please keep 20 cm away from the back and 30 cm away from both sides of the air purifier while it is in
operation. Please set the product up on a dry, stable and flat surface for use; set up far away from heat
sources.
›
Proper operation is only ensured at a mains voltage of 230V / 50 Hz! Do not open the frame, and do not
complete repairs on this product yourself. Repairs should be completed by a professional technician! Do
not pour water, other liquids or flammable cleaning agents into the product, to avoid product damage or
fires due to electric shock.
›
Do not clean the housing with solvents or liquid chemicals, in order to avoid damage to the exterior
housing. The air flow should be kept clear. Dust, cotton fibres, hair or other materials may not block the air
intake. Do not place objects on the air outlet, and do not reach inside.
›
If the device is not in use for a long period of time, please disconnect the plug from the outlet. Instruct
children not to use or touch this purifier.
›
The air intake and outlet may not be covered.
K
A
B
J
L
C
E
F
G
H I
DE
EN
NL
FR
ES
D
13