Publicité
Step 1: open the battery cover on the back of the remote control and load into two
AAA(1.5V) batteries; (dry batteries are not available in this product)
Step 2: turn off the main power switch on the car;
Part 3: hold down Forward and Back keys at the same time, (note that hold down
at the same time) when the Speed display flashing, the main power switch on the
car, the Speed display red light to stop flashing, code success; Key description:
Speed key for speed regulation, each time change a speed,Speed key on a red
light for low speed, two red lights for medium speed, three red lights for high speed;
Special description:
the remote control installed on tow AAA (1.5v) batteries, you can use the
remote control to operate the product; vice versa, according to the code
operation instructions to code;
a.
Press button Forward and the car moves forward;
b.
Touch and press Back , the car back;
c.
Press button Speed display to adjust the speed of the car.
d.
Touch and press Left key . The car turns to the left.
e.
Touch and press Right and the car turns to the right;
f.
Brake for the brake key, touch the car to maintain the brake state,
red indicator all flashing, and then touch the brake state contact;
This product may have remote control priority (depending on product
configuration): When the remote control is operated, the pedal
switch of the product is invalid; when the remote control operation is
stopped, the pedal switch of the product can be used.
If the product has the function of code-free,
8
Publicité
