Publicité
Use control panel to control your cooker hood (Fig. 4a)
OFF motor
1
Pressing the button during functioning, the hood turns OFF.
2
Speed Increase
Pressing the button the hood passes from the OFF state to speed 1.
Pressing the button (hood in ON state) the motor speed is increased from speed 1 to intensive.
To each speed corresponds the ignition of the respective led.
Speed 1: 1
Speed 2: 2
Speed 3: 3
Speed 4: 4
3
ON/OFF lights
4
Speed timing
Function state indicator
5
Speed Timing
The timing of the speed is enabled by pressing key 4, once the timing expires the hood turns off.
The timing is subdivided as follows:
Speed 1 - 20 minutes (1 fixed, flashing point) Speed 2 - 15 minutes (2 fixed, flashing point) Speed 3 -
10 minutes (3 fixed, flashing point)
Speed 4 - 5 minutes (4 fixed, flashing point)
During time-running, if key 1 or 4 is pressed, the hood turns off; if key 2 is pressed, the hood stops time-
-running and sets to the selected speed.
Remote control unit (Fig. 4b)
Your cooker hood can be controlled by a remote control unit.
Remote control unit functions are described below:
Adjust cooker hood fan speed
> - increase cooker hood fan speed
< - reduce cooker hood fan speed
Use Timer
Set Timer
> - increase timer duration
< - reduce timer duration
- light ON/OFF
- increase light brightness
- reduce light brightness
To use the remote control unit:
-
Gently bend the tab and pull out the battery compartment cover on the back of the remote control
unit.
-
Place the new batteries in the remote control unit according to the markings inside battery compart-
ment.
-
Close the battery cover.
-
Point the remote control unit toward the front of the cooker hood.
Ensure there are no obstacles between the remote control transmitter and the sensor on the cooker
hood.
Fluorescent light can interfere with the remote control operation.
OPERATION AND MAINTENANCE
11
Publicité
