Télécharger Imprimer la page

Beurer MG 135 Mode D'emploi page 15

Masquer les pouces Voir aussi pour MG 135:

Publicité

8. Cleaning and maintenance
CLEANING
WARNING
• Before cleaning disconnect the power supply unit from the mains socket and disconnect it from the
device.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter into the device
or accessories.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
• The removable cover can be machine-washable at 30°C. Please note the symbols for care and
cleaning on the label sewn into the cover.
Storage
If you do not use the device for longer periods, we recommend storing it in the original packaging in a dry
place without weighting it down.
Note
• You can use any standard size cover (40 x 40 cm) for the massager.
9. In the event of problems
Problem
Massage heads rotating
at reduced speed.
Massage heads not
moving.
10. Disposal
CAUTION
For environmental reasons, do not dispose of the device in the household waste at the end of
its useful life. Dispose of the unit at a suitable local collection or recycling point. Dispose of the
device in accordance with EC Directive – WEEE (Waste Electrical and Electronic Equipment).
If you have any questions, please contact the local authorities responsible for waste disposal.
11. Technical specifications
Mains operation:
Input
Output
Average active efficiency
Efficiency at low load (10 %)
No-load power consumption
Dimensions
Weight
Cause
The load on the massage
heads is too great.
Appliance not connected to
the power supply.
100-240 V~; 50/60 Hz; 0.8 A
12.0 V
1.5 A; 18.0 W
≥ 86.30 %
≥ 84.95 %
≤ 0.05 W
approx. 40 x 40 x 10 cm
approx. 1800 g
Remedy
Release the massage heads.
Connect the mains part and switch on the
device.
15

Publicité

loading