Installation (continued)
4
Mounting the light fixture
□
Align the xture (B) with the mounting plate (FF).
And then tighten the mounting bolt (EE) securely
through the center of the mounting plate (FF).
Do not over tighten.
□
Push the rubber plug (AA) rmly into the
mounting bolt hole on the light xture (B).
5
Caulking around the light
fixture
IMPORTANT: Failure to completely caulk around the light xture
base (B) could lead to water damage and is not covered under warranty.
□
Caulk around the light xture base (B) and
mounting surface with silicone sealant (not
included).
NOTICE: When attaching this light to an external, surface mount
junction box, caulk around the inside of the light xture (B) before
attaching to the light xture (B).
AA
B
6