Troubleshooting (continued)
Problem
The lights stay on continuously.
Possible Cause
□
The motion sensor may be picking up a
heat source, such as an air vent, dryer
surface.
□
dimmer or timer.
□
bulb.
□
Heat or light from the bulbs may be
turning the motion sensor on and off.
□
objects and may be turning the motion
sensor on and off.
□
The motion sensor is in "TEST" mode
and warming up.
10
Solution
□
Decrease the "SENSITIVITY"
setting or reposition the
motion sensor.
□
Do not use a dimmer or
timer to control the light
or timer with a standard on/
off wall switch.
□
a circuit without motors,
bulbs.
□
Reposition the lamp heads
away from the motion
sensor.
□
Decrease the "SENSITIVITY"
setting or reposition the
motion sensor.
□
While in "TEST" mode, the
light only stays on for 3~5
seconds. Set the "TIMER
MINUTES" control to a timed
setting.