Publicité
Cabinet Cutout Instructions
For proper operation of your cooking appliance, the cabinets
must be properly constructed and squared with respect to
the counter top and the cabinet face.
For proper operation of these units, the cabinet must be
leveled and include a separator/support shelf under the
range.
The minimum horizontal distance(s) from sides and back of
appliance to adjacent vertical combustible walls extending
above the top panel:
Item
Dimension from burner center of appliance
A
71/4" Min. (184mm Min.)
B
8" Min. (203mm Min.)
m )
7 6 2 m
3 0 " (
m o f
b o t t o
e t
F r o m
c a b in
h e a d
r f a c e
o v e r
g s u
o k in
t o c o
WARNING
The minimum vertical distance to combustible material
above the range cooking top is 30" (762mm), provided the
overhead construction does not extend 15" (381 mm) from
the rear wall. The recommended distance between the
floor and the bottom of the cutout opening is 4" (102mm).
NOTE: Follow the range hood or microwave hood
combination installation instructions for dimensional
clearances above the cooktop surface, if they are installled
above this cooktop.
CCD-0005503 Rev: 01-17-23
Cabinet and counter cutout dimensions:
Item
17" RV Range
A
173/4" (451mm)
B
201/8" (511mm)
C
161/8" (410mm)
D
15/16" (23mm) max.
E
11/2" (38mm) max.
F
45/16" (110mm)
G
39/16" (90mm)
D
E
Separator Shelf
Oven Installation
When the cabinet has been prepared according to the
dimensions given and the gas line is in place.
1. Take your range oven out of the carton and place on a flat
surface. Remove the packing materials.
2. Hold the baffle and pull upward to release the top glass
cover assembly from the oven. (Fig. 1)
Fig. 1
- 7 -
Model
21" RV Range
173/4" (451mm)
201/8" (511mm)
201/16" (510mm)
15/16" (23mm) max.
11/2" (38mm) max.
45/16" (110mm)
39/16" (90mm)
Gas Hose Hole
A
F
C
Publicité
