Publicité
7. Charging in «Authorized» mode
8. Load Management
8.1. Dynamic Load Management
You can use this feature if a compatible energy meter is connected to your charging station and to your prop-
erty's electrical supply.
The energy meter measures the total power consumption in your property. If some other load over the set
maximum current for load management is added when charging is ongoing, the charging station will decrease
the charging current. If the total power consumption reaches the allowed maximum power of your property,
the charging interrupts until the total power consumption has decreased to a value at which the charging can
continue.
You can see the real time charging current from the Charger Control Application.
You can enable / disable this feature from the Charger Control Application.
4 / 84
Start charging
Remove the plug from the plug holder.
1
Plug in your electric vehicle.
Open the Charger Control application on your mobile device.
2
Press «Start» in the application.
Stop charging
Open the Charger Control application on your mobile device.
3
Press «Stop» in the application.
Unplug your electric vehicle.
4
Put the plug back into the holder.
RAK135B / 2024-04-22
Publicité
