Publicité
14.2. Pairing the charging station with your mobile device
Paired charging station
Press the button to
enter the following
menus:
• Status
• Details
• Settings
• Software Update
Demonstration
video
Up to 8 mobile devices can be paired to the charging station. Obey the pairing procedure above for every new
mobile device. Re-boot (power on / power off from supply or internal RCBO) is required also if you want to
introduce another mobile application to the charging station.
Only one mobile device can be connected to the charging station. The charging station is shown grey on other
paired mobile devices, which are within the Bluetooth range.
«Unpair» button is in «Settings» behind the three dots on the top right corner. When you unpair an iOS device,
it must also be manually removed from the mobile device's Bluetooth settings.
14.3. Application user interface
Charging current / Charged energy
Tap this icon to access the
«Details» menu.
External control
Start / Stop charging
Details about the charging event,
load management and hardware limits
Status
RAK135B / 2024-04-22
Pairing procedure
1.
First switch off the charging station from the
main switch and then switch it on again.
2.
Start the
pairing procedure within 3 minutes.
3.
Open the application.
4.
Select from «Discovered Devices» the charg-
ing station you want to pair with your mobile.
5.
If the pairing fails the first time, try again
starting from step 1.
6.
When the pairing is completed, you can find
your charging station in «My Devices».
Online manuals
Application settings
Version information
Analytics
Possible notifications
regarding your charging
event
Dynamic load
management
Max. charging
current
Software version information
Available updates
Charger settings
Load management settings
7 / 84
Publicité
