Publicité
Calibrating Your Artisan
Preparing Your System for Calibration
1
Make sure that your color settings are set to "millions" or at least 16-bit color.
2
Make sure your display is set to "Professional" mode. To do this, press the "Picture Effect" button on the front of your GDM-C520
display until the on-screen display shows the text "Professional".
3
Warm your display up by leaving the display on and displaying a relatively bright screen (over 50% white) for at least an hour before
calibration.
4
Make sure that the Artisan
5
Lower the light in the room to under 64 lux. Ideally, the ambient light level should be approximately 16 lux.
Calibrating Your System
1
Double-click on the Artisan
2
Choose a target colorspace from the "Target Colorspace" dropdown menu. Choose from the following three options:
Print RGB D50:
Print RGB D65:
Web RGB (sRGB): Standard colorspace for output limited to computer displays, TV, and video.
3
Click the "Calibrate" button.
4
Center the Artisan
TM
process.
5
Click the "Start" button. Your system will take approximately 10 minutes to fully calibrate.
6
When the calibration is done, a "Calibration Complete" message will appear. Remove the sensor.
7
The new calibration is now active, and is displayed under the "Calibration Data" dropdown menu on the main screen.
Quick Specifications
AC input voltage/current
Operating Temperature
Dimensions
Weight (display only)
Other accessory items in the package
If you need additional assistance in setting up your display or calibrating your system, please refer to the user's manual, located on your Artisan
Color Reference System CD. If you still require aid, you can reach Sony at http://www.sony.com/displays/support, or by phone at 1-866-256-9392.
6
System
TM
Sensor is connected to one of your computer's USB ports.
TM
TM
icon to start the application. The main screen will appear.
Standard colorspace for U.S. prepress and printing professionals.
Standard colorspace for European prepress and printing professionals.
Sensor over the target in the middle of the screen, using the hash marks on the screen and sensor to guide this
Get other manuals https://www.bkmanuals.com
100 – 240 V ~ 50 – 60Hz, 2.0 – 1.0 A
10°C – 35°C
Approx. 19 5/8" x 19 3/4" x 19 1/4"
(497 x 499 x 487 mm)
Approx. 67.1lbs (30.5kg)
GDM-C520 Display
Powercord
Artisan
Signal Cable
TM
Artisan
Sensor and protective case
TM
Display Hood
Artisan
System CD
TM
Quick Setup Guide
Warranty card
TM
Publicité
