Care and cleaning.
to maintain optimum performance, clean the filters at least every 30 days.
Air Filters
Dirty filter—Needs cleaning
Turn the Zoneline off before cleaning.
The most important thing you can do to maintain
the Zoneline is to clean the filter at least every
30 days. Clogged filters reduce cooling, heating
and air flow.
Keeping these filters clean will:
■ Decrease cost of operation.
■ Save energy.
■ Prevent clogged heat exchanger coils.
■ Reduce the risk of premature component failure.
To clean the air filters:
■ Vacuum off the heavy soil.
■ Run water through the filters from the
back side.
■ Dry thoroughly before replacing.
NOTE: The air filters are interchangeable
and will fit in either the right or left side.
10
All manuals and user guides at all-guides.com
FRONT
Clogged filter—Greatly
reduces cooling, heating
and airflow.
To remove the air filters:
FRONT
Pull up
To replace the air filters:
Push down
CAUTION:
Zoneline without the filters in place. If a filter
becomes torn or damaged, it should be replaced
immediately.
Operating without the filters in place or with
damaged filters will allow dirt and dust to reach
the indoor coil and reduce the cooling, heating,
airflow and efficiency of the unit.
Replacement filters are available from your
salesperson, GE dealer, GE Service and Parts
Center or authorized Customer Care
2 Air filters
Do not operate the
servicers.
®