Publicité
Chapter 3
• Clean the cabinet prior to use. For further details we refer to chapter
maintenance.
• Leave the installation to stand for at least 2 hours before switching on the
cabinet.
• Plug into a grounded power socket.
Using the thermostat
For use and settings of the thermostat, please refer to the manual supplied with
this product.
XR02CX
To see the set point.
1.
Push and immediately release the SET key, the set point will be
showed;
2.
Push and immediately release the SET key or wait about 5 sec to
return to normal visualisation;
To change the set point.
1.
Push the SET key for more than 3 sec, the value will be displayed and
the °C LED starts blinking;
2.
To change the set point value push the arrows and to memorise the
new set point value push the SET key again or wait 10sec.
User Manual
Using the appliance
Prior to use
EMERGENCY STOP
REMOVE THE PLUG FROM THE SOCKET!
Thermostat
25
Publicité
